Anderson Metals 00560-08-XCP25 Tube Sleeve, 1/2 in, Delrin - pack of 25

Delrin Sleeve 60P 1/2: Ideal for Aluminum, Brass, Copper, and Plastic Tubing. Operates within -65 to 250F. For ID copper, reduce OD by 1/8". Easy assembly and disassembly, no flaring tool needed.

• Insert Tube: Place it into the fitting
• Primary Applications: Water, Gasoline, Oil, and Vacuum Lines
• Attach Nut and Sleeve: Slide them onto the tube, ensuring the thread faces the end
• Tighten Nut: Turn it onto the fitting until snug, using the following guide: Up to 1/4 Inch = 1-1/4 Turns, 5/16 Inch = 1-3/4 Turns, 3/8 Inch and Up = 2-1/4 Turns
• Temperature Range: Negative 65 Degrees to Plus 250 Degrees Fahrenheit
• Nut Options: Standard fittings use short nuts, long nuts available for higher vibration applications
• Tube Compatibility: Use with copper, aluminum, or plastic tubing (plastic requires 60P sleeve and 61P insert)
• Prepare Tube: Cut a smooth, square end on the tubing
• Assembly Instructions: Follow the given steps
• Disassembly: Easy to disassemble, no flaring tool required
• Construction: Three-piece design - Nut, Sleeve (or Ferrule), and Body